Bitmain Antminer Power Supply APW9_14.5V- 21V EMC For S17, S17 Pro and T17 For Sale
-25%Hot

Bitmain Antminer Power Supply APW9_14.5V- 21V EMC For S17, S17 Pro and T17 For Sale

$450.00

Bitmain Antminer Power Supply APW9_14.5V- 21V EMC For S17, S17 Pro and T17 For Sale

$450.00

Add to cart
Buy Now

Buy Bitmain Antminer Power Supply APW9_14.5V- 21V EMC For S17, S17 Pro and T17 Online | Bitcoinminerz.

 

APW9
OUT1 DC Voltage 14.5V-21V
Rated Current(220V input) 170A
Rated Power (220V input) 3600W
Ripple & Noise <1%
Source Regulation <1%
Load Regulation <1%
Setup, Rise Time <2S
Power off Protection Trip Time >10mS
OUT2 DC Voltage 12.3V
Rated Current(220V input) 12A
Ripple & Noise <1%
Voltage Accuracy 12.2V-12.4V
Source Regulation <1%
Load Regulation <1%
Setup, Rise Time <2S
Power off Protection Trip Time >10mS
Input Voltage Range 200-240V AC
Frequency Range 47-63Hz
Power Factor >0.99(full load)
Leakage Current <1.5mA(220V 50Hz)
Protection Low-voltage Input 80-89V AC
Output Short Circuit Yes
Output Overcurrent 95-130A
Overheat Protection Yes
Environment Operating Temperature -20-60℃
Operating Humidity 20%-90%RH(non-condensing)
Altitude < 2000m
Structure Dimensions 204.8SSS*157*42.5mm
Weight 3.2kg
Cooling Mode force-air cooling
Noise 67dBA

Bitmain Antminer Power Supply APW9_14.5V- 21V EMC For S17, S17 Pro and T17 For Sale | Bitcoinminerz.

Bitmain APW9 Power supply for Antminer S17, S17 Pro and T17. Bitmain APW9 is compatible with Antminer s17, s17 pro and t17 power supply. Bitmain APW9 power supply is a step-down (transformer) voltage regulator module with an output of 9V-12V DC voltage. The board also has a PCBA within its enclosure with protection against short circuits, to prevent damage to the APW9 or host devices. Please note: you must balance your power supply when used with a single device

Reviews

There are no reviews yet.

Be the first to review “Bitmain Antminer Power Supply APW9_14.5V- 21V EMC For S17, S17 Pro and T17 For Sale”

Your email address will not be published. Required fields are marked *